4-58
IPMI Information
You can see system event logs (SEL), sensor data records (SDR), and field replaceable units (FRU) information, which
are called IPMI information. By using the IPMI information, you can see and examine troubles and events on the host
server, and determine a part to be replaced.
Displaying System Event Logs (SEL)
When you click [
] to display system event logs (SEL) on Control Panel, SEL information is loaded from BMC, and
the following window showing system event logs (SEL) opens.
On the upper part of the window, a list of logs appears. On the lower part of the window, detailed information of the
entry selected from the list appears.
When you click [
] for reloading, the SEL information is reloaded from BMC, and you can update the information to
latest.
Clearing SEL Information
You can clear the SEL information on BMC by clicking [
], the icon for SEL clearing. When you see the message for
confirmation, click [Yes] if you want to clear SEL. If not, click [No] so that SEL clearing will not be performed.
Displaying Sensor Data Records (SDR)
When you click [
] to display sensor data records on Control Panel, SDR information is loaded from BMC, and the
following window showing sensor data records appears.
To Next Page
Loading...
