NEC Express5800 140He - Front View (with the Front Door Open)

2-4
Front View (with the Front Door Open)
See "Lamps" described later.
1 3.5
Ins h floppy disk drive to read data from the disk or write data to the disk.
1-2: Disk slot
ccessing)
2 CD-
The CD-ROM drive reads data from the inserted CD-ROM.
2-1: Emergency eject hole - 2-2: CD Tray eject button - 2-3: Access lamp lit nge when accessing)
3.5-inch disk bay
onal hard disk slots. Hard disk drives having the thickness of 1 inch can
e following the bold-faced character indicates the SCSI ID.
4 DIS
5 ro
6 Me
-1 tor - 6-2: Memory board power lamp - 6-3: Memory board attention lamp
7 d
h
d
8 .2
DA
n
9 d ay
s 3-drive SCSI Media Bay in this bay. With the cage, up to thirteen hard
is er.
-inch floppy disk drive
ert a 3.5-inch floppy disk to the 3.5-inc
1-1: Eject button
1-3: Floppy disk access lamp (lits green when a
ROM drive
s ora
3
The
b
3.5-inch hard disk bay contains additi
inserted into the slots. The number
K lamp
P cessor board
5-1: Processor board ejector
mory board
6 : Memory board ejec
6-4: Memory board redundancy lamp - 6-5: Memory board attention switch
A ditional memory board slot
old-faced character indicates the slot number.
T
A
e number following the b
ditional memory board s
hall be installed in the slot #2, #3, and then #4 in this order.
5-inch device bay
T (digital audio tape) drive or optical disk drive may be installed in the 5.25-inch device bays. Slot #1 (right)
5
a d slot #2 (left).
A
In
ditional 3.5-inch disk b
tall the optional HotSwap HDD cage
k drives can be connected to the serv
d
2-1
2-2
2-3
1-2
1-3
1-1
4
1
2 3
5
8
7-3
7-4
4
3-0
4
7-2
6-5
3-1
3-2
3-3 3-4 5-1
6
6-1
6-2
6-3
6-4