9-20
PCI Board
The server contains six slots for PCI board, and three slots for PCI-Express board.
Some PCI boards support the hot-plug function by which they may be installed or removed with the power of the server
being on. Your server supports the hot-plug function if the Windows Server 2003 or Windows 2000 is used as operating
system. The PCI boards supporting the hot-plug function only include the 100BASE-TX Adapter, the 100BASE-TX
Adapter and the 1000BASE-T Adapter.
IMPORTANT: The PCI board is extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity from your body before
handling the PCI board. Do not touch the PCI board terminals or on-board parts by a bare
hand or place the PCI board directly on the desk. For static notes, see the section
"Anti-static Measures".
NOTES:
The tab on the PCI board slot indicates hot-plug or non-hot-plug by its colour. Hot-plug
slots have a green tab (PCI slot #5 through #8), and non-hot-plug slots have a blue tab
(PCI slot #1 through #4).
The PCI-Express boards are x1, x4, x8, and x16. The server can contain x1, x4, and x8
PCI-Express board.
Non-hot-plug PCI board slots
(colour: blue)
Hot-plug PCI board slots
(colour: green)
PCI #1, #2 (32-bit/33MHz, 5V PCI)
PCI #3 (PCI-Express (x4))
PCI #4, #5 (PCI-Express(x8))
PCI #6, #7, #8, #9
(64-bit/100MHz, 3.3V PCI-X)
To Next Page
Loading...
