5-11
Installing and Setting Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
PROSet is a utility that confirms the function of network contained in network driver.
Utilizing PROSet enables the following items:
Confirm detailed information about the adapter.
Diagnose loop back test, packet transmission test, etc.
Setup of teaming.
Configuring several network adapters as one team provides the server a tolerant environment on any trouble and
enhance throughput between the switches.
PROSet is necessary to use these features.
Follow the procedure below to install PROSet.
1. Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. The [Windows Explorer] dialog starts.
* Procedure with the standard start menu
Click Start menu and click [Windows Explorer].
* Procedure with the classic start menu
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "PROSET.EXE" in the following directory.
CD-ROM DriveLetter:\WINNT\DOTNET\BC5\PROSET\WS03XP32
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Choose "Typical" and click [Next].
7. Click [Install].
8. When [InstallShield Wizard Completed] window is displayed, click [Finish].
9. Restart the system.
To Next Page
Loading...
