E-6
Updating the System - Applying Service Pack -
IMPORTANT: If you install Windows Server 2003 CD-ROM which contains Service
Pack 1 to your system, you do not have to apply Service Pack 1 again.
To ensure normal system operation you should update your system using the following procedures.
1. Logon to the system using the administrator account or another account which is a member of the
Administrators group.
2. Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu is automatically displayed on the screen.
3. Click [Setup] with left mouse button and click [Update Express5800 system] section.
4. Continue your work for system update as the following message.
5. Click [Restart Computer] to restart the system.
6. Remove the EXPRESSBUILDER CD-ROM from the CD-ROM drive immediately after clicking [Restart
Computer]
IMPORTANT: If you change the configuration of the system (by adding or removing
hardware or Operating system software components) or repair the system, you must run the
system update again.
To Next Page
Loading...
