G-10
STEP 4 REMOVING COMPONENTS FOR TOWER MODEL FROM
SERVER
IMPORTANT: A number of sensitive electronic parts are installed in the server. To
prevent the parts from being damaged by discharge of static electricity accumulated in your
body, make a part of your body contact with a grounding screw at a connector on the server
or an peripheral or an unpainted frame to discharge the static electricity before starting the
job.
To convert the server configuration for the tower model to that for the rack mount model, first remove the following
components:
Front door
Memory slot cover
Hinge lock bracket
Pedestals
Top and side covers
To Next Page
Loading...
