2-26
SLEEP Switch
T save almost all power of the server (power-saving mode or sleep mode). he SLEEP switch allows you to
NOTE: To use the SLEEP switch, an operating system supporting the sleep feature is
required. (Available for Windows Server 2003/Windows 2000.)
POWER switch
SLEEP switch
Press the SLEEP switch on the front of the server to place mode. (The POWER/SLEEP
lamp blinks.) In the power-saving mode, the server retains the s of the previous operations.
To resume the original state, press the POWER switch. (It may take a little me to resume the original state.)
the server in the power-saving
memory data and the sta
tu
ti
NOTE: The operational level in the power-saving mode depends on the operating system
in use. (Available for Windows 2000.)
IMPORTANT: Do not change system configuration while turning into the power-saving
mode or in the power-saving mode. Otherwise, you may fail to resume the original state.
POWER/SLEEP lamp
To Next Page
Loading...
