6-13
8. Confirm that the [Configuration Diskette] check box is checked and type the file name for the Setup File in
[File Name].
9. Insert the floppy disk formatted by 1.44 MB into the floppy disk drive and click [OK].
Now [Configuration Diskette] has been created. [Configuration Diskette] is used when you install Windows
Server 2003 or Windows 2000. Put a label and keep it in a safe place.
NOTE: For information on the contents of each item, refer to the Online Help.
If you want to modify the information file that already exists, click [Modify information files] on
Configuration Diskette Creator window. Refer to the Help to modify the inf file.
To Next Page
Loading...
