NEC Express5800 140He - Page 209

7-7
7. Follow the Guide line shown at the bottom of the screen and press ESC to show the End user Menu shown
below.
Please choose a function by the arrow key and push Enter key.
Enduser Menu
T
eDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
<Test Result>
<Device List>
<Log Info>
<Option>
<Reboot>
<Test Result> shows the diagnosis completed screen aforementioned.
<Device List> shows the information of all the devices connected.
<Log Info> shows the log information and error messages of the diagnosis. It can be saved to a floppy
disk. To save the log information to a floppy disk, insert a formatted floppy disk in a floppy
disk drive and select <Save[F]>.
<Option> change where to output log
<Reboot> Restarts the Express Server.
8. Select <Reboot> in the End user Menu above.
The Express Server restarts and EXPRESSBUILDER boot the system.
9. Exit EXPRESSBUILDER, and remove the CD-ROM from the CD-ROM drive.
10. Turn off the server and unplug the power cord from the receptacle.
11. Reconnect all the LAN cables to the server.
12. Plug the power code.
This completes the System Diagnostics.