D-9
Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2. Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel (R) PRO/1000...)] is the name of On-Board adapter. All other names show
the Optional Network Board.
3. Click the [Driver] tab and click [Update Driver...].
[Hardware Update Wizard] appears.
4. Select the [Install from a list or specific location (Advanced)] radio button and click [Next].
5. Select the [Search for the best driver in these locations] radio button and check off the [Search removable
media (floppy, CD-ROM...)] check box.
6. Check the [Include this location in the search] check box and when using [(N8104-86/111)], specify :
– [CD-ROM driveletter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E]
when using [(N8104-112/103/113)]
– [CD-ROM driveletter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E].]
when using [(N8104-86/111)]
Then click [Next].
7. Click [Finish].
To Next Page
Loading...
