NEC Express5800 140He - Page 392

G-26
2. Install the other end of the cable arm on the arm bracket installed in step 1.
 For the distance between the mount faces at the front and rear of the rack being 700 mm:
Fix the arm bracket with four screws (C) and four washers (B) at the position shown in the figure below.
A
rm bracket
 For the distance between the mount faces at the front and rear of the rack being 743 mm to 760 mm:
Fix the arm bracket with four screws (C) and four washers (B) at the position shown in the figure below.
A
rm bracket
 For the distance between the mount faces at the front and rear of the rack being 760 or 900 mm:
Fix the arm bracket with four screws (C) and four washers (B) at the position shown in the figure below (the
figure below shows the example with the distance between the mount faces at the front and rear of the rack
being 900 mm).
Arm bracket