2-29
CD-ROM in the CD-ROM drive.
2. Press M drive.
tr
the Eject button on the front of the CD-RO
The ay comes out a little.
3. Hold the tray lightly and pull it out toward you until the tray stops.
4. Put the CD-ROM on the tray careful the tray.
5. As shown in the figure below, hold other hand
to make the hole of the CD-ROM f
ly and securely with the date recorded surface facing toward
the tray with a hand and press the CD-ROM with fingers of an
it to the rotor at the centre of the tray.
6. Push the front of the tray lightly
IMPORTANT: If a noisy sou
to retract it into the drive.
nd in driving the CD-ROM drive occurs after setting a
CD-ROM, set it again correctly.
Roto
To Next Page
Loading...
