3-7
TT
IMPORTANT:
Power
To con
devices may not be used for the server.
A leased line cannot be connected directly to the serial port connectors.
off the server and a peripheral device before connection. Connecting a powered
peripheral device to the powered server will cause malfunctions and failures.
nect a third-party peripheral device or interface cable to the server, contact your
service representative for availability of such a device or cable. Some third-party
Keyboa
(multipo
Device with US
(e.g., term
rd
Mouse
Display
unit
Hub
rt repeater)
B interface (USB2.0)
inal adapter)
REAR
Printer with
parallel interface
Network system on LAN
(connected via a hub)
Device with seria
interface (e.g.,
modem)
Device with ICM
(e.g., disk exp
Finally connect the provided
power cord to the receptacle.
If connecting the server to UPS,
see the explanation below.
Use this inlet only
when an optional
power supply unit is
additionally installed.
l
B interface
ansion unit)
Hub
(multiport repeater)
To Next Page
Loading...
