4-9
Processor Settings
Selecting "Processor Settings" on the Main menu shows the following submenu.
See the table below for the items.
Option Parameter Description Your Setting
Processor Retest [No]
Yes
Clears the error information on the processor.
Processor Speed
Setting
– Indicates the frequency of the processor.
Processor 1-4
CPUID
–
A numeral indicates the ID of processor. "Disabled"
indicates that the processor is defected by BMC.
"Not Installed" indicates that the processor is not
installed.
(Display only)
Processor 1-4
L2 Cache Size
– Indicates the L2 cache of processor.
Processor 1-4
L3 Cache Size
–
Indicates the L3 cache size if the processor has L3
cache memory.
Hyper-Threading
Technology
Disabled
[Enabled]
Setting this item to "Enabled" allows the
hyper-threading technology to be used in the ACPI
mode. From operating system that supports
Hyper-Threading Technology feature, the specified
number of processors is twice as many as the actual
number of the installed processors.
With Windows 2000 Server / Advanced Server, the
operation of hyper-threading technology is not
guaranteed
Execute Disable
Bit
[Disabled]
Enabled
Disables or enables the Execute Disable Bit feature of
the processor.
Intel(R)
Virtualization
Technology
[Disabled]
Enabled
This menu appears only when the processor supports Intel
® Virtualization
Technology.
Specify whether the Intel® Virtualization Technology is enabled or disabled.
If the parameter is changed, the DC power of the system must be turned off.
Select [Exit] → [Exit Saving Changes] and restart the system. Then, turn off
the DC power on POST screen.
Echo TPR
[Enabled]
Disabled
Specify whether Echo TPR is enabled or disabled.
This menu appears only on servers with Dual-Core Intel® Xeon™
Processors.
[ ]: Factory-set
To Next Page
Loading...
