4-13
Hot-plug PCI Control
Selecting "Hot-plug PCI Control" on the PCI Configuration submenu shows the following screen.
See the table blow for the items.
Option Parameter Description Your Setting
Reserving
memory space for
PHP
[Disabled]
Minimum
Middle
Maximum
Determines memory space at every empty slot for PHP
(PCI Hot-plug).
Reserved memory space is:
[Disabled]
None
[Minimum]
6 (2+4) MB
[Middle]
48 (16+32) MB
[Maximum]
96 (32+64) MB
[ ]: Factory-set
NOTE: The bus number of PCI slot varies depending on whether this parameter is set to
"Disabled" or others. Pay attention when you need to setup the program again.
To Next Page
Loading...
