NEC Express5800 140He - Page 90

4-16
Option Parameter Description Your Setting
Serial Port A Disabled
[Enabled]
Specify whether serial port A is enabled or disabled.
Base I/O Address [3F8]
2F8
3E8
2E8
Interrupt IRQ 3
[IRQ 4]
Selects the base address and interrupt (IRQ) for serial
port A. These menus are displayed when the Serial
port A is enabled.
Serial Port B Disabled
[Enabled]
Specify whether serial port B is enabled or disabled.
Base I/O Address 3F8
[2F8]
3E8
2E8
Interrupt [IRQ 3]
IRQ 4
Selects the base address and interrupt (IRQ) for serial
port B. These menus are displayed when the Serial
port B is enabled.
Parallel Port Disabled
[Enabled]
Specify whether the parallel port is enabled or
disabled.
Mode Output Only
Bi-directional
EPP
[ECP]
Base I/O Address [378]
278
Interrupt IRQ 5
[IRQ 7]
DMA channel [DMA 1]
DMA 3
Selects the parallel port operation mode, base
address, interrupt (IRQ), and DMA channel. These
menus are displayed when the Parallel Port is enabled.
PS/2 Mouse Disabled
[Enabled]
Specify whether the mouse is enabled or disabled.
USB Controller Disabled
[Enabled]
Specify whether the USB controller is enabled or
disabled.
Legacy USB
Support
Disabled
[Enabled]
Specify whether the USB keyboard is made available
in operating system which does not support USB
formally.
[ ]: Factory-set