4-21
Server
Positioning the cursor on "Server" shows the Server menu.
The items which can be set on the Server menu and their functions are described below. For the setting, first select
"System Management" or "Console Redirection" and press
Enter to display the proper submenu.
See the table below for the items.
Option Parameter Description Your Setting
Assert NMI
on PERR
Disabled
[Enabled]
Indicates whether PCI PERR is supported or not.
If this item is set "Enabled", the system offers an error
through the NMI when an error occurred.
Assert NMI
on SERR
Disabled
[Enabled]
Indicates whether PCI SERR is supported or not.
If this item is set "Enabled", the system offers an error
through the NMI when an error occurred.
FRB-2
Policy
Disable FRB2 Timer
[Disable BSP]
Do Not Disable BSP
Retry 3 Times
Set this item to "Disable BSP".
Boot
Monitoring
[Disabled]
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Indicates whether the boot monitoring function is enabled or
disabled on booting.
To use this function, install ESMPRO Agent. Do not use this
function if the system is booted from operating system
without installation of ESMPRO Agent or CD-ROM. Set this
item to "Disabled" if ARCServe uses the Disaster Recovery
Option.
To Next Page
Loading...
