101
5. Set the Active option.
• Use the SELECT 왖 or 왔 button to select [Active] and press the ENTER button.
A check mark will be placed in [Active].
6. Complete the settings.
• Use the SELECT 왖 or 왔 button to select the [OK] button and press the ENTER button.
On- time or off-time will be set.
You will be returned to the Program Timer screen.
Activating the Program Timer
On the Program Timer screen, select [On].
This will activate the time settings.
Selecting [Off] will disable the Program Timer even when a check mark is placed in the [Active] check box of the Edit
screen.
NOTE:
• The Program Timer is executed on a set time basis, not on a program basis.
When one or more active on- and off-time are set, the earlier time setting will take preference.
• The off-timer programs not marked with a check in the [Repeat] check box will be disabled and the check mark in the [Active]
check box will be cleared.
The on-timer programs not marked with a check in the [Repeat] check box will be disabled and the check mark in the [Active]
check box will be cleared.
• When on-time and off-time are set for the same time, the off-time setting will take preference.
• The on-time setting will not be executed while the cooling fans are running or an error is occurring.
• If the off-time setting is expired in condition in which the power off is not possible, the off-timer setting will be executed in
condition in which the power off is possible.
• Programs with [On] selected on the [Edit] screen will not be executed even if the Program Timer is enabled.
Changing the programmed settings
1. On the Program Timer screen, use the SELECT
왖
or
왔
button to select a program you want to edit and
press the ENTER button.
• The [Command] screen will be displayed.
2. Select the [Edit] button and press the ENTER button.
The [Edit] screen will be displayed.
3. Change the settings.
4. Use the SELECT
왖
or
왔
button to select the [OK] button and press the ENTER button.
The programmed settings will be changed.
You will be returned to the Program Timer screen.
6. Using On-Screen Menu
To Next Page
Loading...
