115
5. Using On-Screen Menu
[INSTALLATION(2)]
[SHUTTER SETTINGS]
Enabling and disabling the lens shutter function. You can also set how long the light will take to fade in and fade out
when either the SHUTTER button on the remote control.
POWER ON
SHUTTER
OPEN When the power is turned on, the light source comes on and the picture is
projected.
CLOSE The light source does not come on when the power is turned on.
When the SHUTTER button is pressed, the shutter is released and the light
source is turned on.
FADE IN TIME Set how long the light will take to fade in after the SHUTTER button is pressed.
The time can be set from 0 to 10 seconds in increments of 1 second.
FADE OUT TIME Set how long the light will take to fade out after the SHUTTER button is pressed.
The time can be set from 0 to 10 seconds in increments of 1 second.
To Next Page
Loading...
Need help?
General
