141
6. Connecting to Other Equipment
❷ Making Connections
A computer cable, HDMI cable, or a DisplayPort cable can be used to connect to a computer.
Analog RGB signal connection
• Connect the computer cable to the monitor out terminal (mini D-sub 15 pin) on the computer and the computer
video input terminal on the projector. Please use a computer cable attached with a ferrite core.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector INPUT button on the projector
cabinet
Button on the remote control
COMPUTER IN
4:COMPUTER
4/COMPUTER
COMPUTER IN
AUDIO IN
AUDIO OUT
Stereo mini-plug audio cable (not supplied)
NOTE:
• Please check the operating manual of the computer as
the name, position and direction of the terminal may
differ depending on the computer.
Computer cable (sold commercially)
To Next Page
Loading...
Need help?
General
