15
2. Projecting an Image (Basic Operation)
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the
AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
Using the power cord stopper
To prevent the power cord from accidently removing from the AC IN of the projector, use the power cord stopper.
Required tool: Phillips screwdriver
1. Mount the power cord stopper over the power plug that connected
to the AC IN terminal.
2. Fasten the screw on the power cord stopper.
To Next Page
Loading...
Need help?
General
