EasyManuals Logo

NEC PA653UL User Manual

NEC PA653UL
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
124
5. Using On-Screen Menu
WIRED LAN
INTERFACE Select [LAN] for using the LAN port for connecting to the wired
LAN. Select [HDBaseT] for using the HDBaseT IN/Ethernet port
for connecting to the wired LAN. The control from the connected
device will be disabled if no signal is sent and received for three
minutes if the projector is connected to wired LAN thru the HD-
BaseT IN/Ethernet. For refusing this, set the standby mode to
[SLEEP] in advance.
PROFILES The settings for the wired LAN can be recorded in the projector
memory in two ways.
Select [PROFILE 1] or [PROFILE 2] and then do settings for
[DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This
will store your settings in memory.
To recall the settings from memory:
After selecting [PROFILE 1] or [PROFILE 2] from the [PRO-
FILES] list.
Select [OK] and press the ENTER button.
Select [DISABLE] when not connecting to a wired LAN
DHCP Place a check mark to automatically assign an IP address to the
projector from your DHCP server.
Clear this check box to register the IP address or subnet mask
number obtained from your network administrator.
IP ADDRESS Set your IP address of the network connected to the projector
when [DHCP] is turned off.
Up to 12 numeric
characters
SUBNET MASK Set your subnet mask number of the network connected to the
projector when [DHCP] is turned off.
Up to 12 numeric
characters
GATEWAY Set the default gateway of the network connected to the projector
when [DHCP] is turned off.
Up to 12 numeric
characters
AUTO DNS Place a check mark to automatically assign the IP address of your
DNS server connected to the projector from your DHCP server.
Clear this check box to set the IP address of your DNS server
connected to the projector.
Up to 12 numeric
characters
DNS CONFIGURA-
TION
Set the IP address of your DNS server on the network connected
to the projector when [AUTO DNS] is cleared.
Up to 12 numeric
characters
RECONNECT Retry to connect the projector to a network. Try this if you have
changed [PROFILES].

Table of Contents

Other manuals for NEC PA653UL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC PA653UL and is the answer not in the manual?

NEC PA653UL Specifications

General IconGeneral
BrandNEC
ModelPA653UL
CategoryProjector
LanguageEnglish

Related product manuals