NEC PH1000U - To replace the lamp:

186
7. Maintenance
To replace the lamp:
1. Removethelampcover.
(1)Loosenthetwolampcoverscrews.
 •Thelampcoverscrewisnotremovable.
(2)Pullthelampcovertowardsyouandremoveit.
2. Removethelamphousing.
(1)Loosenthethreescrewssecuringthelamphousinguntilthephillipsscrewdrivergoesintoafreewheelingcondi-
tion.
 •Thethreescrewsarenotremovable.
 •Donottouchtheexhaustfanpowerconnectors.
(2)Removethelamphousingbyholdingit.
CAUTION:
Makesurethatthelamphousingiscoolenoughtohandlebeforeremovingit.
Exhaust fan power
connector
Handle