NEC PH1000U - Shutter Indicator

229
9. Appendix
Temp. Indicator
Indicatordisplay Projectorstatus Procedure
Off
Noproblem
Flashing Red Temperatureproblem Thetemperatureprotectorhasbeenactivated.Iftheroom
temperatureishigh,movetheprojectortoacoolplace.Ifthe
TEMP.indicatorstillbeashingwhentheprojectorisusedat
operatingtemperatures,contactanNECprojectorcustomer
supportcenter.
Orange Warmingup Theusageenvironmenttemperatureislowerthanthe
projector’soperatingtemperature(0°C).Inthatcase,raise
theusageenvironmenttemperaturetoa0°Corhigherand
turnontheprojector.Iftheprojectoristurnedonataround
0°C,itmaytake5minutestowarmuptheprojector.During
thiswarm-upperiodtheTEMP.indicatorwillash.Whenthe
warm-upiscompleted,theTEMP.indicatorwillgooff.
SHUTTER Indicator
Indicatordisplay Projectorstatus Procedure
Off Light –
Flashing Green
Lenscalibrationisinprocess. –
On Green
Lightshuttered –
If the temperature protector is activated
Ifthe projector’sinternaltemperature rises abnormally, thelamp turns off and thetemperatureindicator ashes
(repeatedlyincyclesof2).
Itmayhappenthattheprojector’stemperatureprotectorissimultaneouslyactivatedandtheprojector’spowerturns
off.
Ifthishappens,dothefollowing:
- Unplugthepowercordfromthepoweroutlet.
- Ifusinginaplacewherethesurroundingtemperatureishigh,movetheprojectortoadifferent,coolplace.
- Ifthereisdustintheventilationholes,clean.(→ pages 180and184)
- Waitassuchabout1hourfortheprojector’sinternaltemperaturetolower.