94
5. FEATURE OPERATION
TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS)
Press the desired One-Touch Speed Calling key,
or press key and One-Touch Speed Call-
ing key.
To program
(Available only on DT Series with One-Touch Speed
Calling key.)
Press key.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press key again to save the number.
To verify
Press key.
Press desired One-Touch Speed Calling key.
Display indicates digits programmed.
Note 1: To program a hook switch for transfer or feature
activation, press key as first digit. (! dis-
plays on LCD.)
Note 2: To program a pause, press the key as any
digit other than the first digit. (– displays on LCD.)
Note 3: To program a Voice Call, press key after
dialing station number. (V displays on LCD.)
Note 4: One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the UNIVERGE SV7000 fea-
ture access code. The features may be programmed
on a system basis by the Telephony Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a certain
extension.
4:26 PM TUE 13 APR 2004
SPEED SET
To Next Page
Loading...
