NEC UNIVERGE DT310 - Call Pick-Up (Group); Call Pick-Up (Direct)

108
CALL PICK-UP (GROUP)
When station within pick-up group rings
Lift handset.
Press CALL PICK-UP or dial “Call Pick-up” access
code (may be stored on One-Touch Speed Calling
key).
Connection to calling party is established.
If currently on a call, press key and dial
“Call Pick-up” access code.
The original party is placed on hold.
Using the Soft Key
Lift handset and press PICK Soft Key.
Connection to calling party is established.
CALL PICK-UP (DIRECT)
To program pick-up direct key (One-Touch
Speed Calling key)
Press key.
Press One-Touch Speed Calling key.
Dial “Direct Call Pick-up” access code.
Press key again.
When a station within the system rings
Lift handset, receive dial tone.
Press PICK-DIRECT and dial the station number to
be picked up.
– Or –
Dial “Direct Call Pick-up” access code and the sta-
tion number to be picked up.
Connection to calling party is established.
If busy, original call must be placed on hold before
new call can be picked up.
Transfer
station
Calling
party
Called
4:26 PM TUE 13 APR 2004
PICK UP 32000 DDD
station
Calling
party
Called
4:26 PM TUE 13 APR 2004
PICK UP 2001
MIC >>>
2000
Feature
Feature
station
Calling
party
Called
4:26 PM TUE 13 APR 2004
PICK UP 32000 DDD