29
Installing/Removing Key Set Unit
• To Remove Key Set Unit
STEP 1: Insert a tapered rod lightly into the right side
of the line key panel/button pannel.
STEP 2: Lift out the line key panel/button pannel to re-
move it from the telephone.
STEP 3: Remove the line key card.
• To Install Key Set Unit
STEP 1: Align the holes in the line key card with the
buttons on the telephone.
STEP 2: Align the holes in the line key panel/button
pannel with the buttons on the telephone and
then push the four corners of the panel until
the panel clicks into place.
Line Key Panel
Button Panel
Line Key Card
Line Key Card
Line Key Panel
Button Panel
To Next Page
Loading...
