NEC UNIVERGE DT310

103
DIAL INTERCOM
To initiate
Lift handset or press the key.
Press DICM key.
Dial desired intercom station number. Receive
ringback tone.
To answer
DICM LED flashes, indicating an incoming intercom
call.
Press DICM.
Lift handset or press key. LCD shows solid
green.
If called station is engaged in a non-intercom call,
the station may press DICM after placing the origi-
nal call on hold (with key.)
To bridge into a dial intercom call
Note: Bridging is an optional feature.
Press the DICM key, lift handset or press
key.
A three-party conference is established.
Note: Dial intercom provides a Dial Intercom group
where each member of the group may be called by
a 1- or 2-digit number without using their prime
lines.
Speaker
Called party
4:26 PM TUE 13 APR 2004
ICM 2
Speaker
HOLD
Calling party
4:26 PM TUE 13 APR 2004
ICM 2
Speaker
Overriding party
4:26 PM TUE 13 APR 2004
OVERRIDE 3
4:26 PM TUE 13 APR 2004
CONF