104
CONFERENCE
With call in progress, ask party to hold.
Press key, receive interrupted dial tone.
Dial desired number.
After call is answered, press key. The LED
lights.
Three-way conference is established.
Using the Soft Key
With a call in progress, press key and dial
desired number.
After call is answered, press CONF Soft Key.
Three-way conference is established.
If one party hang up, other two remain connected.
Conf LED goes out.
TO ESTABLISH A BROKER CALL
While engaged in a call and wishing to consult a
third party, press key. Caller is automati-
cally placed on hold.
Dial desired party to consult.
Press key to return to original caller. Third
party is automatically placed on hold.
By repeating these steps, it is possible to alternate
between calls.
Note: The display indicates connected station or trunk at
any given time.
TO ANSWER A CAMPED-ON CALL
While engaged in a call, receive the camp-on indi-
cation (one short tone burst). LED of key
flashes.
Press key. Call in progress is placed on
hold.
Connection to camped-on call is established.
Press key to return to original call.
Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate
between calls. Display indicates connected station
or trunk at any given time.
4:26 PM TUE 13 APR 2004
CONF
4:26 PM TUE 13 APR 2004
CONF
MIC >>>
To Next Page
Loading...
