196
TO SET KEY TOUCH
The procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT Series is off-hook.
STEP 1: From the Home sceen, click User Settting →
Talk → Key Touch Tone.
STEP 2: Select 1. Automatic, 2. Disable or 3. Tone or
4. Voice.
STEP 3: Click button to save the change to the
database.
STEP 4: The following dialog appears. Click but-
ton on the dialog.
TIP:
When "0 Automatic" is set, the default setting
(Tone) is applied.
To Next Page
Loading...
