NEC UNIVERGE DT310 - Outgoing Trunk Queuing; Off-Hook Trunk Queuing; Executive Override

109
OUTGOING TRUNK QUEUING
If trunk busy
Receive Trunk Busy indication. Press CALL
BACK. Call is placed in queue for next available
trunk.
When trunk is available, setting station is alerted by
ringing and flashing red LED.
Press key or lift handset. Dial tone is heard
or number is automatically dialed if Least Cost
Routing is provided.
OFF-HOOK TRUNK QUEUING
Press key, receive dial tone.
Dial desired telephone number. Encounter a trunk
busy condition.
Station user receives service set tone and leaves
speaker on.
The desired number is automatically dialed when a
trunk becomes available.
EXECUTIVE OVERRIDE
If called station is busy
Press OVERRIDE.
Interrupted parties receive warning tone.
Three-way conference is initiated.
Conf LED lights.
Using the Soft Key
Press E-OVR Soft Key.
Interrupted parties receive warning tone and three-
way conference is initiated.
Note: Override may be programmed by the Telephony
Server Admin. for one of the Programmable fea-
ture keys, or may be programmed by the user on a
One-Touch Speed Calling key by storing the Re-
call and Override access code.
Speaker
4:26 PM TUE 13 APR 2004
OG-Q SET
Speaker
Overridden station
4:26 PM TUE 13 APR 2004
OVERRIDE 2001
4:26 PM TUE 13 APR 2004
CONF
4:26 PM TUE 13 APR 2004
OVERRIDE 2001
MIC >>>