NEC UNIVERGE DT310

114
LED goes out at your station (or the DT Series of
the multiline station).
Press key. Call Forwarding – Don’t Answer
is cancelled.
LOGGED OUT IP STATION - CALL
DESTINATION
To Set
Lift handset or press key.
Press the FDL Key or dial “Logged Out IP Station –
Call Destination” access code.
Dial destination station number; receive service set
tone.
Replace handset or press key. Logged Out
IP Station – Call Destination is set.
Using the Soft Key
Press FDL Soft Key; receive special Dial Tone.
Dial destination station number.
Receive service set tone; “FORWARD SET” is dis-
played.
To Verify (only for terminal with LCD)
Press “Logged Out IP Station – Call Destination”
feature key lit red or press FDL.
Display indicates the station number calls are for-
warded.
Note: With Soft Key Operation, FDL flashes on the dis-
play.
To Cancel
Lift handset or press key; receive Dial
Tone.
Press the FDL Key or dial “Logged Out IP Station –
Call Destination” cancel code; receive service set
tone.
Replace handset or press key. Logged Out
IP Station – Call Destination is canceled.
Speaker
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
Speaker
Speaker
4:26 PM TUE 13 APR 2004
FORWARD SET XXXX
4:26 PM TUE 13 APR 2004
FORWARD SET XXXX
MIC >>>
4:26 PM TUE 13 APR 2004
FORWARD XXXX
Speaker
Speaker
4:26 PM TUE 13 APR 2004
FORWARD CANCEL