NEC UNIVERGE DT310 - To Change Group Name

144
TO CHANGE GROUP NAME
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: On the Directory screen, select Group
Setting and then press (Enter),
(Right-cursor) or OK soft key. (or press
key.)
STEP 3: Select a group name to be changed and then
press (Enter) or OK soft key.
In this example, Default is selected.
STEP 4: Select Name and then press (Enter),
(Right-cursor) or OK soft key. (or press
key.)
3
3
Back OK
2
3
4
1
0
Search
Edit
Own Number
Delete All
[Directory]
Group Setting
1
TIP: The user can set ringer tone (→ select 2 Ring
Tone) and illumination types (
→ select 3 Illumina-
tion) for calls routed to the specified group here.
Ringer tone and illumination types can be set for
“Name”, “Group” and “Telephone set”. The ringer
tone and illumination types set for “Name” have
higher priority than the types set for Group and
Telephone set. Also, the ringer tone and illumina-
tion types for Group have higher priority than the
types set for Terminal set.
Back OK
3 VIPs
:
4 Famlily
5 Friends
6 Group 6
20 Group 20
2 Colleagues
[Group]
1 Default
1
1
Back OK
2
3
1
Ring Tone
[Group Setting]
Illumination
Name