92
SECURITY MODE
DT730 Series has the Security ( ) key which
prevents information leakage from terminal. While the
terminal is locked, Security Lamp lights up.
• TO LOCK THE TELEPHONE
Before placing DT700 Series in Security mode, you can
set a password. For details on the password setting,
see TO CHANGE PASSWORD in chapter 3 Terminal
Setup.
Press (Security) key on DT730 Series. The
followign message is displayed on LCD.
Press (Enter) or OK soft key to place DT700
Series in Security mode.
When DT730 Series is placed in Security mode,
Security Lamp lights red and the screen saver will
be activated.
• TO UNLOCK THE TELEPHONE
Display the Password Entry screen by either of the
following operations.
• Press any key while the screen server is
activated.
• Press (Security) while the screen server
is activated.
Enter the password and then press (Enter) or
OK soft key. Security Lamp is extinguished and
Security Mode is canceled.
Security Lamp lights up.
Security lock will be released.
Please input a password.
BK
Cancel OK
Press Security Key.
BK Cancel OK
Security lock will be released.
Please input a password.
To Next Page
Loading...
