123
Using the Soft Key
Press flashing DND Soft Key.
Note: DND must be programmed by the Telephony Serv-
er Admin. on a Programmable feature key.
CALL REDIRECT
Example:
DT Series Station A views on the DT Series display
the Station Number or Caller ID of an Incoming Call
and immediately redirects the call by pressing a
Function Key. The destination of the Call Redirect
will be the Call Forwarding-Don’t Answer Destina-
tion or the Recall Destination if the call is trans-
ferred without Call Forwarding-Don’t Answer being
set at the station.
Note: This feature is available in North America only.
Call Redirect To Call Forward-Don’t Answer
Destination:
Station A sets Call Forward-Don’t Answer to Station
B.
Station C dials Station A, it rings and displays Sta-
tion C’s number on the display.
Station A presses the Call Redirect Key.
REDIRECT is displayed on the LCD, and the call
immediately forwards to Station B.
Using the Soft Key
Station A sets Call Forward-Don’t Answer to Station
B.
Station C dials Station A, it rings and displays Sta-
tion C’s number on the display.
Station A presses the REDIR Soft Key.
REDIRECT is displayed on the LCD, and the call
immediately forwards to Station B.
To Next Page
Loading...
