NEC UNIVERGE DT310

118
MEET-ME PAGING
Example:
Station A can page Station B. When Station B dials
answer code, they are connected.
To Page (Station A)
Dial “Paging” access code, receive continuous
ringback for one second.
Page station B.
Remain off hook or hang up.
To Answer (Station B)
If Station A remains off hook
Station B dials “Paging” answer code, and they are
immediately connected.
If Station A hung up
Station B dial “Paging” answer code, and Station A
DT Series rings.
When station A goes off-hook, they are connected.
Note: Paging function can not be supported with IP en-
abled DT700 Series.
PAGING TRANSFER
Example:
Station A receives an important call for Station B who is
not at a desk. Station A can page Station B. When
Station B dials the Paging answer code, Station A can
announce the call and transfer it to Station B.
Station A paging
Ask calling party to hold.
Press key. Receive interrupted dial tone.
Dial “Paging” access code. Receive continuous
ringback for one second.
Page Station B.
Remain off-hook or hang up.
To Answer (Station B)
If Station A remained off hook
Station B dials “Paging” answer code, and is con-
nected with Station A. Station A announces call.
Trunk number
4:26 PM TUE 13 APR 2004
PAGING 3
4:26 PM TUE 13 APR 2004
PAGING 3
Calling trunk
number
4:26 PM TUE 13 APR 2004
TRANSFER DDD 3
Transfer