NEC UNIVERGE DT310 - To Enable;Disable Dtmf Tone

195
TO ENABLE/DISABLE DTMF TONE
The procedure below shows how to enable/disable
RTP alarm.
STEP 1: From the Home sceen, click User Settting →
Talk → DTMF Tone.
STEP 2: Select 1. Automatic, 2. Disable or 3. Enable
(see the following table).
STEP 3: Click button to save the change to the
database.
STEP 4: The following dialog appears. Click but-
ton on the dialog.
Menu Items Descriptions
1 Automatic
(Note 1)
Follow the setting on the System. If
no setting is made in the System, the
default setting (DTMF=ON) is
applied.
2 Disable
Follow the setting on the terminal
(OFF).
3 Enable
Follow the setting on the terminal
(ON).
TIP:
For the setting on the System, contact to the Sys-
tem Administrator.
OK
OK