NEC UNIVERGE DT310

106
CALL WAITING - ORIGINATING
To program call waiting key (on One-Touch
Speed Calling key)
Press key.
Press desired One-Touch Speed Calling key.
Press key. ! appears on LCD. (See Note.)
Dial “Call Waiting” feature access code.
Press key.
Note: To program a hook switch for transfer or feature
activation, press as first digit. “!” dis-
plays on LCD.
To activate call waiting – originating
Dial desired station number, receive busy tone.
Press CALL WAITING.
Receive special ringback tone.
Call waiting tone is sent to busy station.
– Or –
Lift handset or press key.
Dial “Call Waiting” access code, receive dial tone.
Dial busy station.
Using the Soft Key
Dial desired station and receive busy tone.
Press CW Soft Key receive call waiting ringback
tone.
To answer a waiting call
Call Waiting Tone is heard.
Press key.
Waiting call is automatically connected. Original
party is placed on hold.
By repeatedly pressing key, it is possible to
alternate between calls. Display indicates con-
nected station or trunk at any given time.
Feature
Recall
Feature
Recall
Called station
number
4:26 PM TUE 13 APR 2004
C WAIT 2000
Speaker
4:26 PM TUE 13 APR 2004
C WAIT
4:26 PM TUE 13 APR 2004
C WAIT SET 2000
Called station
number
4:26 PM TUE 13 APR 2004
C WAIT SET 2000
MIC >>>
Answer
Answer
Calling station
number
4:26 PM TUE 13 APR 2004
C WAIT 2001