NEC UNIVERGE DT310

100
VOICE CALL
Lift handset.
Dial desired station number.
Press Voice.
Speak to called party.
Using the Soft key
Lift handset.
Dial desired station number; VOICE Soft Key
appears while station is ringing.
Press VOICE Soft Key. Speak to called party.
Note 1: A Voice Call may be programmed on a One-Touch
Speed Calling key by pressing One-Touch Speed
Calling key, dialing the extension, and pressing the
key. (V displays if programming on an DT
Series with LCD. Save by pressing One-Touch
Speed Calling key.)
Note 2: If called party is on their line when a Voice Call is
attempted, calling station’s display indicates:
Note 3: A voice call is restricted if called party’s station is
not a DT Series. Display indicates:
TO ANSWER A VOICE CALL HANDS
FREE
Receive incoming Voice Call.
Press the MIC Soft Key or key. LED lights.
Respond hands-free.
Note: If privacy is required, lift handset.
4:26 PM TUE 13 APR 2004
VOICE 2000
4:26 PM TUE 13 APR 2004
2000
MIC >>>VOICE
Transfer
4:26 PM TUE 13 APR 2004
VOICE BUSY
4:26 PM TUE 13 APR 2004
VOICE REST
Mic
Calling station
4:26 PM TUE 13 APR 2004
VOICE 2001