NEC UNIVERGE DT310

78
TO HOLD A CALL
Press key. Held line wink flashes.
To Retrieve
Lift handset or press key.
Press held line. Use handset to converse.
If unanswered
After preprogrammed time, Automatic Recall is initi-
ated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Note: Hold shows as a flashing green LED on your
phone. The same line on other phones shows as a
flashing red LED. Recall shows as a flashing
green LED on your phone and flashing red LED on
other phones with the same line.
TO PLACE A CALL ON EXCLUSIVE
HOLD
Press key twice. Line appearance indi-
cates interrupted wink.
To Retrieve
Lift handset or press key.
Press held line. Use handset to converse.
TIP:
If held line appears on other DT Series stations,
the associated LED flashes red slowly.
TIP:
Any station with this line appearance can retrieve
the call.
HOLD
Held station
number
4:26 PM TUE 13 APR 2004
HOLD 2001
Speaker
TIP:
If held line appears on other DT Series stations,
LED remains steadily lit red.
TIP:
Only the DT Series that set Exclusive Hold option
can retrieve the call.
HOLD
Held station
number
4:26 PM TUE 13 APR 2004
E_HOLD 2001
Speaker