NEC UNIVERGE DT310 - Page 152

142
STEP 19:The display goes back to the Edit screen. Se-
lect Memory ID and then press (En-
ter), (Right-cursor) or OK soft key. (or
press key.)
STEP 20:Enter a desired Memory Number (0 - 499),
then press (Enter) or OK soft key.
STEP 21:When the display goes back to the Edit
TIP:
The user can set illumination type for calls routed
to the specified name (calling party) here. Illumi-
nation type can be set for “Name”, “Group” and
“Telephone set”. The illumination type set for
“Name” has higer priority than the types set for
“Group” and “Terminal set”.
TIP:
If the illumination setting is not performed, 1
Automatic is applied.
TIP:
When 1 Automatic or 2 Default is selected, the
setting for “Group” or “Telephone Set” is applied.
Back OK
2
1
5
6
3
Default
7
Disable
Green
Yellow
Blue
[Illumination]
Download3
Automatic
Light Blue
8
4
9
10
11
Red
Purple
White
Rotation
0
0
TIP:
A maximum of 500 Memory IDs can be regis-
tered. If multiple telephone numbers are
assigned to a Memory ID, the user may not regis-
ter up to 500 Memory IDs.
TIP:
If Memory ID setting is not performed, a number
is automatically set in ascending numeric order.
Save Back OK
2
4
1
5
6
8
9
0
3
Group:Colleagues
Illumination:Automatic
Ring Tone:Automatic
7
Tel#1:31300
Tel#2:
Tel#3:
Tel#4:
Memory ID:0
Company Name:NEC
Name:Ken Cobus
[Edit]
Input a memory number.
BK Back OK
0-499
[Memory ID]
1