EasyManua.ls Logo

NEC Univerge SV8100 VM8000 InMail - Page 147

NEC Univerge SV8100 VM8000 InMail
388 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VM8000 Issue 1.0
InMail System Guide 2 - 119
47-08 Call Routing Mailbox Options
47-09 Announcement Mailbox Options
4. Set up the Subscriber Mailbox options for the Department Group Mailbox.
For Auto Attendant Direct to Voice Mail:
47-06-07 Auto Attendant Direct to Voice Mail
Enable (Yes) or disable (No) Auto Attendant Direct to Voice Mail for the
Group Mailbox.
By default, this option is disabled.
47-06-03 Auto Erase or Save
Set the auto save option for new messages ( 1 = Auto Save, 2 = Auto
Erase).
By default, this option is set to 1 (Auto Save).
47-06-09 Auto Time Stamp
Enable (Yes) or disable (No) Auto Time Stamp for the Group Mailbox.
By default, this option is disabled.
47-06-05 Recording Conversation Beep
Enable (Yes) or disable (No) the Conversation Recording Beep for the
Group Mailbox.
By default, this option is enabled.
47-06-13 Directory List Number
Specify the Directory List number (1~8, 0 = No lists,
,
= All lists) to which
the Group Mailbox belongs.
By default, this option is 0 (No lists).
47-06-08 Forced Unscreened Transfer
Enable (Yes) or disable (No) Forced Unscreened Transfer for the Group
Mailbox.
By default, this option is disabled.
47-06-02 Message Playback
Set the Group Mailbox message playback order (1 = LIFO, 2 = FIFO).
by default, this option is set to 2 (FIFO).
47-06-04 Message Retention
Set how long the Group Mailbox will retain saved messages.
By default, this option is 0 (indefinite).

Table of Contents

Related product manuals