VM8000 Issue 1.0
InMail System Guide 2 - 189
Message Waiting Lamp
Description
An extension’s Message Waiting (MSG) lamp flashes on the telephone to indicate
that the user has new messages waiting in their mailbox. After VM8000 InMail is
properly installed and programmed, telephone Message Waiting Lamp operation is
automatic. The lamp flashes fast when new messages are in the extension user’s
mailbox. The Message Waiting Lamp is a visual reminder of new messages. The
subscriber does not have to call their mailbox and listen to the voice prompts to find
out when they have new messages.
Related Features
None
Programming
1. Turn Message Waiting lamp for Subscriber Mailboxes on or off.
47-02-08 Message Waiting Lamp (Update MW Lamp)
Enter 0 (No) to disable Message Waiting lamp.
Enter 1 (Yes) to enable Message Waiting lamp.
If Message Waiting lamp is disabled (0), Message Notification does not
function.
By default, this option is 1 (Yes).
2. Select Message Waiting Lamp color.
15-02-28 Message Waiting LED Color
Enter 0 = Flashes Green
Enter 1 = Flashes Red
By default, this option is set to 1 (Flashes Red).
Operation
Not applicable
To Next Page
Loading...
