NEC Univerge SV8100 VM8000 InMail - Figure 4-14 Inmail Utility Prompt Update Version Conversion Confirmation Screen; Figure 4-15 Inmail Utility Initialize Confirmation Screen; Figure 4-16 Inmail Utility Format Options Message Screen

Issue 1.0 VM8000
4 - 10 VM8000 InMail Utility
4. On the VM8000
InMail Utility
Prompt Update
Version
Conversion
Confirmation
Screen (Figure
4-14), click Yes
to overwrite the
newer prompt
set or No to
cancel the
update.
 Overwriting a newer system voice prompt set with an older set can disable certain VM8000 InMail
features.
Initializing the VM8000 InMail CompactFlash Card
The VM8000 InMail Utility provides the option of initializing (reformatting) the InMail
CompactFlash Card. Initializing completely erases the card and loads the latest
system voice prompts. All recorded names, messages and greetings are permanently
erased during initialization. When initializing a CompactFlash card, the Mnemonic
prompts are always installed. If the Numeric prompt set is to be used it must be
installed after the initialization has finished. Refer to Updating the System Prompts on
page 4-9 for details.
1. To initialize
(reformat) the
InMail
CompactFlash
Card, click
Initialize on the
On the InMail
Utility Main
Screen (Figure
4-5 on page 5).
Figure 4-15 InMail Utility Initialize Confirmation Screen is displayed.
2. On the InMail Utility Initialize Confirmation Screen, click Yes to continue initializing or No
to cancel. If Yes, a screen indicating that the format option must be selected is
displayed. (Refer to Figure 4-16 InMail Utility Format Options Message Screen.)
Figure 4-14 InMail Utility Prompt Update Version Conversion
Confirmation Screen
Figure 4-15 InMail Utility Initialize Confirmation Screen