VM8000 Issue 1.0
InMail System Guide 1 - 3
SECTION 2 UPGRADE THE VM8000 INMAIL BLADE
The VM8000 InMail software is integrated into the telephone system software. The
VM8000 InMail voice prompts and messages are stored on the CompactFlash card
that plugs into the VM8000 InMail blade. You will never have to do a separate
upgrade to get new VM8000 InMail features, but you may need to upgrade the voice
prompts stored on the CompactFlash card to activate those new features.
1. Power down the system before removing the VM8000 InMail CompactFlash
card.
N
Ensure the system is powered down.
2. Slide out the CompactFlash card. See Figure 1-3 Remove the VM8000 InMail
CompactFlash Card.
N
Be sure to take adequate static precautions.
3. Use the VM8000 InMail Utility Guide to upgrade the CompactFlash card.
N
Refer to Section 1 VM8000 InMail Utility on page 4-1 for instructions on
how to upgrade the CompactFlash card.
4. Reinstall the CompactFlash card and power up the system.
The InMail CompactFlash drive must never be inserted or removed with the chassis
power on. Always turn chassis power OFF when inserting or removing the InMail
CompactFlash drive.
Figure 1-3 Remove the VM8000 InMail CompactFlash Card
To Next Page
Loading...
