Issue 1.0 VM8000
4 - 2 VM8000 InMail Utility
SECTION 2 REQUIREMENTS
When installing the VM8000 InMail utility, the following minimum requirements apply:
J
Pentium 330 MHz with 128 MB RAM, 256 Color 800 x 600 display, USB port.
J
Windows 2000, Windows XP (32-bit), or Windows Vista (32-bit).
J
CompactFlash Card Reader (SimpleTech STI-UCF-100 or equivalent), or, if your
PC has a PCMCIA slot, PC Card Adapter for Type I CompactFlash Cards
(SimpleTech STI-CFAD or equivalent).
SECTION 3 INSTALLING AND STARTING THE VM8000 INMAIL UTILITY
Installation
1. If the PC has an older version of the VM8000 InMail Utility, un-install it first. If the PC
does not have an older version of the VM8000 InMail Utility, proceed to step 2.
2. Double-click
the installer file
(e.g., NEC
In-Mail Utility
Version
1_2.exe). After
the installer
starts, Figure
4-1 InMail
Utility Install
Wizard
Welcome
Screen is
displayed.
3. Click Next, on
the Install
Wizard
Welcome
Screen.
Figure 4-2
VM8000 InMail
Utility Install
Wizard Settings Screen is displayed.
Figure 4-1 InMail Utility Install Wizard Welcome Screen
To Next Page
Loading...
