NEC Univerge SV8100 VM8000 InMail - Figure 4-6 Utility Select Inmail Card Screen; Figure 4-7 Updated Inmail Portion of Inmail Utility Main Screen

Issue 1.0 VM8000
4 - 6 VM8000 InMail Utility
Selecting the CompactFlash Card
After inserting the VM8000 InMail CompactFlash card into the reader, it must be
selected.
1. From the InMail
Utility Main
Screen (Figure
4-5), click
Select.
Figure 4-6 Utility
Select InMail
Card Screen is
displayed.
 If the InMail
CompactFlash
Card is
changed in the
middle of an
InMail Utility session, click Select to read the new card.
2. Use the
drop-
down box
on the
Utility
Select
InMail
Card
Screen
(Figure
4-6) to
select the
card
(Device)
and click
OK.
The
InMail
Card
portion of the Main Screen updates with the card information. (Refer to Figure 4-7
Updated InMail Portion of InMail Utility Main Screen.)
Figure 4-6 Utility Select InMail Card Screen
Device Select the InMai
l
card from the drop-down
box.
Figure 4-7 Updated InMail Portion of InMail Utility Main Screen
Type: Type of
InMail
Prompt Version: The
version of the system
prompts on the In-Mail
CompactFlash card.
Status: Indicates the
In-Mail Utility is ready
to use the installed
card.
Device: The card reader
drive ID or volume label
(if any).