InMail System Guide 3 - 1
Chapter
3
Programming
SECTION 1 BEFORE YOU START PROGRAMMING
How to use this chapter
The VM8000 InMail programmable options allow you to customize the way
the features associated with an option work. This Programming chapter
provides detailed information to enable you to accomplish the following:
J
Find out about each option.
J
Review the list of features that an option affects.
J
Learn how to enter the option data into system memory.
When you want to customize a feature, refer to information in the Features
chapter, Section 3 Feature Descriptions on page 2-11. The Feature
Descriptions tells you what options you have to change to get the feature
operation you want. Then, look up the options in this section and
customize them as required.
Start-Up Programming
Default P rogramming
SECTION 2 START-UP PROGRAMMING (DEFAULT)
When you install the VM8000 InMail blade and turn on the system,
VM8000 InMail does not automatically start working, but the following
areas are programmed.
J
Subscriber Mailboxes are enabled for extensions 101~108. The
mailbox numbers are the same as the extension numbers.
J
The Automated Attendant does not answer outside calls.
To Next Page
Loading...
