VM8000 Issue 1.0
InMail System Guide 2 - 133
Programming
No additional programming required.
Operation
Leaving a Message for a Coworker
To leave a message in the mailbox of an unanswered extension:
1. Press Message.
2. Leave message and hang up.
OR
Leave message and dial #.
Dialing # sends the message and hangs up.
Leaving a Message from Outside the Company
To leave a message in a mailbox:
1. Leave message and hang up.
OR
Leave message and dial #.
Dialing # may provide you with additional dialing options. This depends on how the called
mailbox’s Next Call Routing Mailbox is set up.
To leave a message in an extension mailbox, you can be:
o Transferred to an extension mailbox by another user.
o Automatically routed to a mailbox when the called party does not answer or is unavailable.
o Sent to the mailbox from the Automated Attendant after dialing * plus the called party’s mailbox
number.
o Routed from the Automated Attendant after dialing a uniquely programmed digit set up to send you
to an extension’s mailbox.
To Next Page
Loading...
