VM8000 Issue 1.0
InMail System Guide 2 - 143
H
For example, to have the Automated Attendant request callers to enter the
number of the Subscriber Mailbox into which they wish to log, for key 3
enter LOGON for the Action and N for the corresponding Number. When
callers dial 3, they hear, “Please enter your mailbox number.”
To have VM8000 InMail require Automated Attendant callers to enter a
Subscriber Mailbox to log into (without playing an announcement), enter XXX in
the corresponding Number option. The key you choose must represent the first
digit in the Subscriber Mailbox numbers.
H
For example, to allow callers to log on to mailboxes 101~199, for key 3
enter LOGON for the Action and XXX for the corresponding Number.
H
To enter an X, press LK2.
To log into any valid Subscriber Mailbox, enter IXXX in the corresponding
Number option.
H
For example, to allow callers to dial 1 plus any Subscriber Mailbox number
to log on, for key 1 enter LOGON for the Action and IXXX for the
corresponding Number.
H
To enter an I, press LK3.To enter an X, press LK2.
See Automated Attendant on page 2-45 for more on how to set up VM8000
InMail to answer outside calls.
By default, key # Action = LOGON and Number = None.
Operation
Logging On to Your Mailbox
To log on to your Subscriber Mailbox:
Press Message.
-OR-
Press Voice mail key (PGM 15-07 or SC 751: 01 + Pilot e.g. 200).
-OR-
From an on-premise single line telephone, lift handset and dial *8.
To log on to your Guest Mailbox or your Subscriber Mailbox from a coworker’s extension:
Press the Speaker key + Dial the VM8000 InMail master number (e.g., 200) + Dial your
mailbox number.
To log on to your Subscriber Mailbox from the Automated Attendant:
1. Wait for the Automated Attendant to answer.
2. Dial # and your mailbox number.
This option may be different in your system. Check with your Communications Manager.
To Next Page
Loading...
